Top Mount Sand Filter - Shenzhen Konche Water Treatment Co., Ltd

Activated carbon filtration is a common treatment to remove offensive tastes and odor, color, chlorine and volatile organic chemicals, pesticides and trihalomethanes (a group of suspected carcinogens). Activated carbon will not remove bacteria, dissolved metals such as iron, lead, manganese and copper, or chlorides, nitrates and fluorides.

Activated carbon filters, usually made up of granulated, powdered or block carbon, act like a sponge with a large surface area to absorb contaminants in the water. Activated carbon, made from coal and nutshells, has a tremendous surface area - as much as 125 acres per pound of carbon. The efficiency of an activated carbon filter is dependent on the amount of carbon in it and the flow rate of water through the filter. The typical carbon filter is about 10 inches high and 3 inches in diameter - enough charcoal to treat about 1,000 gallons of water.

Material: SUS 304, SUS316, A3 carbon steel

Operation type: automatic or manual

Filter media: quartz sand, activated carbon, anthracite, manganese sand

Model	Size	Flow rate (T/H)	Inlet outlet	Shell thickness (mm)
KC-FD300	Φ12×65	1.52	>DN20	1.5
KC-FD400	Φ16×68	22.5	DN25	2
KC-FD500	Φ20×71	23	DN25	2
KC-FD600	Φ24×73	35	DN32	2
KC-FD800	Φ31×82	68	DN32	2
KC-FD1000	Φ39×85	1012	DN40	2
KC-FD1200	Φ47×106	1215	DN50	3
KC-FD1500	Φ55×110	18-25	DN65	3
KC-FD1800	Φ71×124	30-40	DN80	4
KC-FD2200	Φ87×148	50-60	DN125	5
KC-FD2500	Φ98×157	80-90	DN150	6
KC-FD2800	Φ110×165	100-120	DN200	8
KC-FD3000	Φ118×177	120~140	DN200	8